Using QBI 1.2.2 with QuickBooks 2006 will initually result in 0X8004041c and 0X8004003 errors
Perform the following steps and download file for compatibility with US and Canadian QuickBooks 2006
-
Open QuickBooks 2006 and perform an update. File > Update Quickbooks… In the “Update Quickbooks” window, click “Update now” then click on “Get Updates” button. Shut down QuickBooks when finished.
-
If QBI is not presently installed, do perform the installation as per the AyaNova QBI Installation & User Guide section “Installation of AyaNova QBI Trial Mode (Part 1 of 2)” starting on page 7. The Guide is available from http://www.ayanova.com/manual.htm and is required to confirm installation successfull.
-
If QBI is already installed, go to step 5.
-
After QBI installation , reboot the computer
-
Login with administrative access with no other programs running, and perform the following:
-
Download the Intuit QBFC5 installer from http://www.ayanova.com/files/QBFC5_0Installer.exe
-
Install the QBFC5 installer. Reboot the computer. Open Control Panel -> Add/remove Programs and confirm that QBFC 5.0 is installed. Click on the Support Information and confirm the version is 5.0.00203.0. You will also note that a QBFC3.0b is installed - do NOT remove this.
-
Perform the steps in the QBI Installation & User Guide section “Initial Setup of Trial AyaNova QBI (Part 2 of 2)” starting on page 10 to configure QBI connection between QuickBooks and AyaNova.
If you have any questions - please post in the QBI Support forum http://forum.ayanova.com/Forum17-1.aspx